ACL ( EDMONTON | RED DEER | CALGARY ) - tugas mata kuliah jaringan komputer. Inilah hasilnya:
EDMONTON
--- System Configuration Dialog ---RED DEER
Continue with configuration dialog? [yes/no]: no
Press RETURN to get started!
Router>ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname Edmonton
Edmonton(config)#int fa0/0
Edmonton(config-if)#ip add 172.16.10.1 255.255.255.0
Edmonton(config-if)#no shut
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Edmonton(config-if)#exit
Edmonton(config)#int fa1/0
Edmonton(config-if)#ip add 172.16.20.1 255.255.255.0
Edmonton(config-if)#no shut
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up
Edmonton(config-if)#exit
Edmonton(config)#int se2/0
Edmonton(config-if)#ip add 172.16.30.1 255.255.255.0
Edmonton(config-if)#no shut
%LINK-5-CHANGED: Interface Serial2/0, changed state to down
Edmonton(config-if)#exit
Edmonton(config)#router eigrp 10
Edmonton(config-router)#network 172.16.10.0 0.0.0.255
Edmonton(config-router)#network 172.16.20.0 0.0.0.255
Edmonton(config-router)#network 172.16.30.0 0.0.0.255
Edmonton(config-router)#exit
Edmonton(config)#exit
%SYS-5-CONFIG_I: Configured from console by console
Edmonton#
--- System Configuration Dialog ---CALGARY
Continue with configuration dialog? [yes/no]: no
Press RETURN to get started!
Router>ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname Red_Deer
Red_Deer(config)#int fa0/0
Red_Deer(config-if)#ip add 172.16.40.1 255.255.255.0
Red_Deer(config-if)#no shut
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Red_Deer(config-if)#exit
Red_Deer(config)#int fa1/0
Red_Deer(config-if)#ip add 172.16.50.1 255.255.255.0
Red_Deer(config-if)#no shut
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up
Red_Deer(config-if)#exit
Red_Deer(config)#int se2/0
Red_Deer(config-if)#ip add 172.16.30.2 255.255.255.0
Red_Deer(config-if)#clock rate 64000
Red_Deer(config-if)#no shut
%LINK-5-CHANGED: Interface Serial2/0, changed state to up
Red_Deer(config-if)#exit
Red_Deer(config)#int se3/0
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up
Red_Deer(config-if)#ip add 172.16.60.1 255.255.255.0
Red_Deer(config-if)#clock rate 64000
Red_Deer(config-if)#no shut
%LINK-5-CHANGED: Interface Serial3/0, changed state to down
Red_Deer(config-if)#exit
Red_Deer(config)#router eigrp 10
Red_Deer(config-router)#network 172.16.40.0 0.0.0.255
Red_Deer(config-router)#network 172.16.50.0 0.0.0.255
Red_Deer(config-router)#network 172.16.30.0 0.0.0.255
Red_Deer(config-router)#
%DUAL-5-NBRCHANGE: IP-EIGRP 10: Neighbor 172.16.30.1 (Serial2/0) is up: new adjacency
Red_Deer(config-router)#network 172.16.60.0 0.0.0.255
Red_Deer(config-router)#exit
Red_Deer(config)#exit
%SYS-5-CONFIG_I: Configured from console by console
Red_Deer#
--- System Configuration Dialog ---SETTING TELNET PADA RED DEER
Continue with configuration dialog? [yes/no]: no
Press RETURN to get started!
Router>ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname Calgary
Calgary(config)#int fa0/0
Calgary(config-if)#ip add 172.16.70.1 255.255.255.0
Calgary(config-if)#no shut
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Calgary(config-if)#exit
Calgary(config)#int fa1/0
Calgary(config-if)#ip add 172.16.80.1 255.255.255.0
Calgary(config-if)#no shut
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up
Calgary(config-if)#exit
Calgary(config)#int se2/0
Calgary(config-if)#ip add 172.16.60.2 255.255.255.0
Calgary(config-if)#no shut
%LINK-5-CHANGED: Interface Serial2/0, changed state to up
Calgary(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up
Calgary(config-if)#exit
Calgary(config)#router eigrp 10
Calgary(config-router)#network 172.16.70.0 0.0.0.255
Calgary(config-router)#network 172.16.80.0 0.0.0.255
Calgary(config-router)#network 172.16.60.0 0.0.0.255
Calgary(config-router)#
%DUAL-5-NBRCHANGE: IP-EIGRP 10: Neighbor 172.16.60.1 (Serial2/0) is up: new adjacency
Calgary(config-router)#exit
Calgary(config)#exit
%SYS-5-CONFIG_I: Configured from console by console
Calgary#
Red_Deer>ena
Red_Deer#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Red_Deer(config)#line vty 0
Red_Deer(config-line)#password 123456
Red_Deer(config-line)#login
Red_Deer(config-line)#
1. 40.0 tidak boleh di akses oleh 10.0, yang lain boleh.
Red_Deer(config)#access-list 10 deny 172.16.10.0 0.0.0.255
Red_Deer(config)#access-list 10 permit any
Red_Deer(config)#int fa0/0
Red_Deer(config-if)#ip access-group 10 out
2. 10.5 tidak boleh mengakses komp. 50.7, yang lain boleh.
Edmonton(config)#access-list 115 deny ip host 172.16.10.5 host 172.16.50.7
Edmonton(config)#access-list 115 permit ip any any
Edmonton(config)#int fa0/0
Edmonton(config-if)#ip access-group 115 in
3. Komp. 10.5 dapat melakukan Telnet ke Router Red_Deer yang lain tidak.
Red_Deer(config)#access-list 20 permit 172.16.10.5
Red_Deer(config)#line vty 0
Red_Deer(config)#access-class 20 in
- Berkomentarlah dengan sopan dan bijak sesuai dengan isi konten.
- Komentar yang tidak diperlukan oleh pembaca lain [spam] akan segera dihapus.
- Apabila artikel yang berjudul "ACL ( EDMONTON | RED DEER | CALGARY )" ini bermanfaat, share ke jejaring sosial.
Konversi Kode